How To Scan The Camera Port And Ip

IP Camera Initial Network Setup

Follow this IP camera initial setup guide / network setup if y'all are using your Viewtron IP photographic camera without a Viewtron NVR with built-in PoE (Power over Ethernet). For clarification, when you connect a Viewtron IP camera to the PoE port on a Viewtron NVR, much of the initial network setup described in this article is not required because the NVR assigns and manages the IP addresses for you lot. To be clear, these instruction are applicable for the following installation types.

1. Stand up-lone IP Photographic camera Installation - Camera is not setup to record to a separate DVR or NVR. Client plans on using the photographic camera for remote viewing only with no recording or customer volition use the camera's internal SD card slot to record.
2. LAN Connectedness to DVR or NVR - Camera is connected to a local network switch. A DVR or NVR connects to the camera over the local network.

All of these installation methods support the power to view your photographic camera(due south) from iPhone, Android, Mac, and Windows.

---

Stand-Lone IP Camera Installation

Follow these instructions to install your IP camera on your local network and then that you can access the photographic camera directly, as opposed to accessing your IP camera through a DVR or NVR.

1. Connect your camera to your network. Virtually customers either utilise a PoE switch (similar you lot see above) or a single port PoE injector. The ruddy lines that you see higher up represents CAT5e cable connecting the IP camera and laptop computer to the network switch.
2. Your router will automatically assign the IP camera a network IP address.
3. The blue cable represents the CAT5e network cable that connects the video uplink port of the switch to the router.
4. Once the IP camera starts up, which ordinarily takes almost 10 seconds, yous tin locate the IP camera on your network using ane of these three network IP scanner tools.

---

Locating Your IP Photographic camera on the Network

Here are four ways to locate your IP camera on your local network. Please note that the latest IP Installer Tool, Mobile Apps, and VMS Software downloads tin can all exist establish hither.

• IP Installer Tool - If yous have a Windows PC connected to the same network every bit your IP camera, you can install the IP Installer tool to discover your IP camera on your network.
• Mobile Apps - The mobile apps for iPhone and Android both accept a network scanner / IP camera locator function built-in.
• Windows / Mac VMS Software - DVR / IP camera software for Mac and Windows is capable of connecting directly to Viewtron IP cameras. The software has a built-in network scanner / IP photographic camera locator.

---

IP Installer / Network Search Tool

The Viewtron IP locator tool is only bachelor for Windows at this fourth dimension. If you do not have a Windows PC on the aforementioned network every bit your IP camera, delight utilize ane of the other methods to locate your IP camera on your LAN.

1. Download the latest IP Installer software here and un-zip the file on your Windows PC.
2. The un-zipped file is a software installer. Run that program.
3. Please annotation that your Windows PC must be connected to the same local network as your IP photographic camera.
4. Afterward you start the IP locator software, it will automatically scan the local network for Viewtron IP cameras. It will also search for whatsoever non-Viewtron make ONVIF compliant IP cameras. This is what the network search looks like in the IP Installer software.

You lot can see higher up that the IP Installer tool found ane Viewtron IP camera, model IP-D8 on the network.

---

Mobile App Network Search Tool

The Viewtron mobile app for iPhone and Android has a built-in network IP camera search tool. This is convenient for customers who practice non have a Windows PC on their network.

1) Download the latest Viewtron compatible mobile apps here. And then, open the app on your iPhone or Android.

ii) Tap on the Server Listing icon in the upper right. And so tap on the Add Server icon in the upper right.

3) On the "Add Device" screen, tap in the down arrow to reveal and tap on the "Local Scan for Device" selection. It may take 15-30 seconds for the network search to stop and the app does not do a expert job of letting y'all know that information technology is working, so please be patient and wait at least xxx seconds. When the network browse is complete, all of the IP cameras detected on the network will be displayed. You tin can encounter in the above right screenshot that 1 IP-B8 photographic camera was found on IP accost 192.168.0.131.

If you tap on the photographic camera, the IP address will exist added to the IP field in the app.

iv) The IP address:port will exist automatically filled in for you. Enter a Proper name for your IP camera, User ID, and Password. So, tap the preview button to test the network connection. The default User ID for Viewtron IP cameras is "admin". The default password is "123456".

---

VMS Software for Mac and Windows

The VMS (Video Management System) software for Mac and Windows is identical in features and functionality. The interface is exactly the same.

1. Download VMS software for Mac and Windows here.
2. United nations-cypher the file on your PC and install.
3. Please note that your Windows or Macintosh PC must be connected to the same local network as your IP camera.
4. When you start the VMS software, you will exist prompt for User Name and Password. The defaults are admin, 123456.
5. From the main screen, select the Resources Direction link or icon.

   
   

6. From the master screen, select the Resource Direction link or icon.

   
   

7. On the Resource Management screen click on the Add push button.

   
   

8. The "Add Device" screen is a network scanner tool. It will scan the local expanse network for any Viewtron IP cameras, DVRs, and NVRs. It will likewise search for whatever not-Viewtron brand IP cameras that are ONVIF compliant. You can come across in the above screenshot, that the IP scanner found the Viewtron IP camera that we were installing along with 2 other ONVIF IP cameras that are on our network. The quaternary device that was found is a Viewtron DVR. Click the checkbox next to the IP photographic camera that you are adding and press OK. You can make note of the IP address of your photographic camera.
9. Click Home, then Alive View.
10. On the Live View screen, you will see a "default surface area" on the left. Expand this list and y'all will run across the IP camera that yous added.
11. Click and elevate the IP camera from that listing to the live view screen on the right. Y'all should meet a live view of your IP photographic camera.

Higher up is a screenshot of the alive security photographic camera view of a Viewtron IP camera on the Mac software for Viewtron. Information technology looks the aforementioned on Windows.

---

IP Installer / Network Search Tool

The Viewtron IP locator tool is simply bachelor for Windows at this fourth dimension. If you do not have a Windows PC on the same network as your IP photographic camera, please use one of the other methods to locate your IP camera on your LAN.

1. Download the latest IP Installer software here and un-goose egg the file on your Windows PC.
2. The united nations-zipped file is a software installer. Run that program.
3. Please note that your Windows PC must be connected to the same local network as your IP camera.
4. After you first the IP locator software, it volition automatically scan the local network for Viewtron IP cameras. It will also search for any non-Viewtron brand ONVIF compliant IP cameras. This is what the network search looks like in the IP Installer software.

You tin can see above that the IP Installer tool constitute one Viewtron IP camera, model IP-D8 on the network. If you lot double click on the device, a web browser will open. Please note that merely Internet Explorer is supported at this fourth dimension for alive video display. Still, Chrome and Safari web browsers can exist used to manage all of the settings of your IP camera (just no video brandish is supported)

---

Non-PoE DVR / NVR Installation

The above network setup / installation instructions are also applicable when y'all are using a Viewtron DVR or NVR and connecting your IP camera to a local network (not directly to the PoE ports on a Viewtron NVR).

Delight note that Viewtron DVRs also accept congenital-in network IP scanner that can be used instead of the network scanners documented higher up.

---

Next Steps

Here are some additional setup tasks that you should do.

1. DHCP Reservation / Static IP Address Setup - At present that y'all IP photographic camera has been assigned an IP address on your network, you should reserve that accost and so that the same ane is always assigned to it. DHCP reservation is setup in case your camera is e'er restarted or looses power. This ensures that the same IP accost is assigned and your desktop and mobile apps do not loose their connections to your IP camera.
2. Port Forwarding - The in a higher place setup instructions enabled you lot to connect to your IP camera on your local network. If you desire to access your cameras from remotely over the Internet (when you are not on-site with your IP camera), then you demand to setup port forwarding on your router.

---

Learn more about Viewtron Security Camera DVRs / NVRs

---

---

Acquire more nigh the latest Viewtron Hybrid Security Photographic camera DVRs and NVRs for IP cameras with built-in PoE here.

---

Works with Analog CCTV, Network IP, and Hard disk drive BNC Security Cameras

Users can mix and match different camera technologies. This is perfect for customers that have existing CCTV cameras and desire to upgrade to high definition over time. Hybrid iDVR-PROs work with the following security camera types and resolutions. 4K security cameras

• AHD Cameras (720p, 1080p / 2mp, 3mp, 4mp, 5mp, 4K / 8mp / 4K)
• HD-TVI Cameras (720p, 1080p / 2mp, 3mp, 4mp, 5mp, 4K / 8mp / 4K)
• Hard disk drive-CVI Cameras (720p, 1080p / 2mp, 3mp, 4mp, 5mp, 4K / 8mp / 4K)
• Network IP Cameras - ONVIF compatible IP cameras up to 4K resolution supported
• Analog CCTV Cameras (all analog resolution supported including CIF, D1, 960H)

---

Consummate Security Camera Systems

Did you know? CCTV Camera Pros tin can provide a complete surveillance system quote that includes any Viewtron DVR or NVR model? We can include security cameras, cables, connectors, ability supplies, and monitors. We tin can even mix and match IP cameras and Hd BNC security cameras because Viewtron DVRs are hybrid. This means that they work with just about any type of security camera. Every bit you have probably already seen on our website, we have 2, 4, 8, and 16 photographic camera surveillance systems in pre-made packages. Nevertheless, it is not possible for us to package upwards every combination and quantity of all the unlike photographic camera models that we carry. So, nosotros can also provide y'all with a custom quote with equally many cameras equally you need and a mix of any combination of camera model(due south) based on your project requirements. Delight request a quote when you are prepare.

---

Source: https://www.cctvcamerapros.com/IP-Camera-Network-Setup-s/1489.htm

Posted by: gonzalezdoemon.blogspot.com

Share this post