How To Sync Spypoint Camera

SPYPOINT Link-Micro-Lte Cellular Trail Photographic camera User Guide

In the box

1x LINK-MICRO-LTE camera
1x Antenna holder
1x Installation strap
1x Quick beginning guide
1x SIM carte that is pre activated and inserted in the photographic camera

NOTE: Memory carte du jour and batteries are sold separately.

User manual, latest firmware, and FAQ available at:
back up.spypoint.com

Components

1. Antenna
2. Detection lens
3. MicroSD card slot
4. Calorie-free sensor
5. Delay light
6. Photo lens
7. LED
8. ON/OFF switch
9. "STATUS" light
10. SIM card slot
11. Battery compartment
12. Battery holder
13. Slot for installation strap
14. Locking latch
15. Cable lock hole
16. 12V jack
17. Standard ¼"-20 tripod mount
    
    
    

Getting started

SELECT A Power SOURCE

• Lithium or alkali metal AA batteries
• 12V rechargeable battery (#KIT-12V)
• 3.7V rechargeable bombardment pack (#LIT-10

Note: We recommend using the SPYPOINT #LIT-10 rechargeable lithium bombardment pack, sold separately.

FOR Best RESULTS AND NO LEAKAGE:

• Use only new lithium or alkali metal batteries.
• Practise not mix old and new batteries.
• Do not use rechargeable AA batteries (their lower voltage can generate operational problems).

HOW TO INSTALL AA BATTERIES PROPERLY

• Unlock and open the LINK-MICRO-LTE door.
• Accept the battery holder out.
• Insert the AA batteries into the bombardment holder following polarity (+) and (-) indications.
• Identify the bombardment holder back into the battery compartment.

FORMATTING YOUR MicroSD Carte du jour
Before inserting the MicroSD bill of fare into your camera, information technology must be reformatted via a computer to ensure proper functionality.

Memory menu is sold separately. Whether you lot choose to employ a MicroSD carte du jour you lot previously used in another device or a brand new 1 you've just bought, its chapters must not exceed 32 GB and it must exist reformatted. Do no use the "Quick format" option.

INSERTING A MicroSD Bill of fare

• Ensure the photographic camera is turned off.
• Insert a MicroSD memory card (up to 32 GB chapters) into the MicroSD card slot with the label facing upward.
• The carte du jour is inserted correctly when a click is heard.

ACTIVATING YOUR CAMERA

 You must activate your camera through the costless "SPYPOINT app" or by logging on to the SPYPOINT.COM website.

FINDING THE ACTIVATION Code

The activation code is located inside the camera's battery compartment backside the battery holder. You volition need this unique code to activate the LINK-MICRO-LTE.

SPYPOINT APP

Follow these steps:

1. On Google PlayTM or the App StoreTM, search for "SPYPOINT app".
2. Download and install the app on your smartphone or tablet.
3. Start the app. Select "Activate A DEVICE". In the list, select "LINK-MICRO-LTE" then follow the steps.
4. When complete, a confirmation email volition be sent to y'all with instructions on how to finalize the creation of your account will be sent to you.
5. Log in to the SPYPOINT app using your email and countersign.

ACTIVATING YOUR Photographic camera

SPYPOINT website

Follow these steps:

1. On the SPYPOINT website, select "LOGIN" in the top navigation menu. On the displayed folio, select "Annals," fill out the required fields, then log in.
2. Select the + sign on the far right of the page; in the list, select "LINK-MICRO-LTE," then follow the steps.
3. When complete, a confirmation email volition be sent to you with instructions on how to finalize the cosmos of your business relationship will be sent to you.
4. On the website, log in using your e-mail and password.

Notation: You can activate additional cameras and switch between them in the SPYPOINT app or the "MY Account" department of the SPYPOINT website.

CHOOSING A Photograph Manual Program FOR YOUR Photographic camera

Go to
https://www.spypoint.com/en/spypoint-experience/plans to read the latest offers and choose the plan that suits yous.

CONFIGURING YOUR Photographic camera

Both the SPYPOINT app and website let you configure all the photographic camera settings remotely. They also provide bones information on your camera – such equally: cellular signal strength, battery level, and MicroSD card space used. This information is based upon the latest connection with your photographic camera. New settings take effect every fourth dimension the camera connects with the SPYPOINT app or website. Beneath are the most basic settings you will configure.

BASIC PHOTO SETTINGS

Delay: Allows you lot to set the time interval between each detection
earlier the camera takes the next photo.

Multishot: Allows you to fix the number of photos per detection
(up to 2) with a 5-second filibuster between each photograph.

Sensitivity: Allows you to set the detection sensitivity of the photographic camera.

Camera name: Allows you to proper noun each owned photographic camera.

CELLULAR SETUP

CELLULAR SETUP
First transfer time: Allows y'all to cull the time when the camera makes its showtime transfer of the day.

Transfer frequency: Allows you to choose the number of daily transfers.

Advanced OPTIONS/CONFIGURATION

Schedule: Allows you to gear up the catamenia of performance for each
24-hour interval of the week. For a 24-hour operation mode, both the start
and finish times must be 12 AM.

Annotation: Camera transfers are set up by default to every iv hours from midnight.

STARTING YOUR Photographic camera

1. Turn on the camera.
2. The green "Status" light will wink while searching for a signal (can take a few minutes).
3. The "STATUS" lite will light up in i of the following three colors:
    Red: Insufficient signal.
    Orange: Acceptable betoken.
    Green: Optimal signal.
4. When the top correct light flashes red, 30 seconds remain before the photograph mode is turned on. This allows you to leave the expanse without beingness photographed.
5. The camera is fix for use when all the lights turn off.
6. If the calorie-free is ruby-red during step 3, yous should:
   1. Turn your camera off and then back on.
   2. Retry while pointing the antenna at different angles.
   3. Try moving it to a spot with meliorate signal.
   4. Endeavour our #CA-01 long-range cellular antenna (sold separately), which could aid improve signal strength.

INSTALLING YOUR Camera

1. Mount the camera using the installation strap.
2. The photographic camera should be at the same height equally the animal's mid-body.
3. The targeted animal should be at 25 feet/7.5 meters abroad from the photographic camera.
4. For brighter pictures at night, ensure you have elements in the background to reflect the IR flash.

DISPOSAL

Only USE ORIGINAL SPARE PARTS AND ACCESSORIES.

If ane day your photographic camera has been used so intensively that it has to be replaced, or if you lot no longer have any use for information technology, you are obliged to dispose of it at a recycling center.

Information on return points for your electric appliance can be obtained from your local waste disposal company or from your local authoritative offices.

Electric appliances not only incorporate valuable recyclable raw materials, merely also substances which, if disposed of improperly, can affect public wellness and the environment. Assistance ensure that valuable raw materials are recycled when yous render your quondam appliance to a central collection signal.

The WEEE (Waste Electrical and Electronic Equipment Directive ) symbol represents the obligation that the labeled camera to exist sent to a separate center for the proper recycling of electrical and electronic equipment.

FREQUENCY

FREQUENCY RANGE:
800/ 850/ 900/ 1900/ 2100MHz

MAXIMUM Manual Ability:

FREQUENCY	MAX
GSM850	33DBM±2DB
EGSM900	33DBM±2DB
33DBM±2DB	30DBM±2DB
PCS1900	30DBM±2DB
GSM850 (8-PSK)	27DBM±3DB
EGSM900 (8-PSK)	27DBM±3DB
DCS1800 (8-PSK)	26DBM±3DB
PCS1900 (viii-PSK)	26DBM±3DB
UMTS 2100	24DBM+one.seven/-3.7DB
UMTS 1900	24DBM+1.7/-3.7DB
UMTS 900	24DBM+i.7/-3.7DB
UMTS 850	24DBM+1.seven/-three.7DB
UMTS 800	24DBM+ane.7/-3.7DB

FFC

THIS DEVICE COMPLIES WITH Role 15 OF THE FCC RULES.

Functioning is subject to the following ii conditions:

1. This device must non cause harmful interference.
2. This device must accept whatever interference received, including interference that may cause undesired operation.

For a complete list of specifications, features, and settings, visit our LINK-MICRO-LTE folio at www.spypoint.com.

Thank you FOR CHOOSING

FAQ, user manual & latest
firmware available at:
Support.SPYPOINT.COM

JOIN THE COMMUNITY

Sit back and relax as this device is covered by the "Know yous're covered" 2-year warranty. We strive to provide our customers with a positive feel and an outstanding service.

Documents / Resources

References

Source: https://manuals.plus/spypoint/link-micro-lte-cellular-trail-camera-manual

Posted by: gonzalezdoemon.blogspot.com

Share this post